
Pool sand filterHelios 20 in
A simple, sturdy sand filter, with a polyethylene tank that won't rust and quick connectors that make installation easier.
At a glance
The Helios 20 in sand filter has a blow-moulded high-density polyethylene tank that won't rust and is suitable for salt pools. It takes 200 lb of sand, connects with 1.5 in quick connectors, and its 6-way valve rotates 360°.
- Blow-moulded HDPE tank
- 6-way valve, rotates 360°
- 1.5 in quick connectors
- 200 lb of sand
Who this filter is for
We'd rather steer you to the right equipment from the start. Here's when we recommend it, and when we suggest something else.
We recommend it if
- Your above-ground pool is up to 18 ft, or your inground pool is 12 × 24.
- You want to replace a filter at the best price.
Another choice if
- Your pool is bigger: Helios 24 in.
- You want a tank with a 5-year warranty: Nirvana volumetric filter.
- Your filter is fine but the water stays cloudy: try Nature Works media.
Simple and sturdy
Rust-free tank
Blow-moulded high-density polyethylene, compatible with salt water.
Quick connectors
Easy to connect and disconnect at opening and closing.
Rotating valve
The 6-way valve turns to fit your setup.
Specifications
| Feature | Value |
|---|---|
| Diameter | 20 in |
| Sand | 200 lb |
| Tank | Blow-moulded high-density polyethylene |
| Connectors | Quick-connect, 1.5 in |
| Valve | 6-way, rotates 360° |
Which filter for my pool?
A few questions, one suggestion. A technician always confirms before the quote.
Chosen, installed and maintained by the same team
A filter too small for the pump means cloudy water and constant backwashing. We match the filter to your pump and your pool.
Assessment
Pool volume, pump and plumbing: we choose the right size.
Installed price
Filter, filter media and labour, in a clear quote.
Installation
By our technicians, on a fixed date and time, confirmed in advance.
Start-up
We fill the media, do the first backwash and show you how the valve works.
Every season
Opening and closing by the same team, with an email of what was done after every visit.
A simple filter, properly installed and well matched to the pump: that's what keeps the water clear.
A word from the VP expertCompare our filters
| Model | Tank | Diameter | Connectors | Key strength | |
|---|---|---|---|---|---|
| Nirvana volumetric | One-piece HDPE | 20 and 24 in | 1.5 and 2 in | Deeper filter bed, 5-year tank warranty | View → |
| Helios 20 in | Blow-moulded HDPE | 20 in | 1.5 in | Quick connectors, entry-level price | |
| Helios 24 in | Blow-moulded HDPE | 24 in | 1.5 in | More sand for large pools | View → |
| Nature Works (media) | Recycled glass | — | — | Replaces the sand in your filter | See → |
Your questions about the Helios 20 in filter
20 or 24 in?
As a guideline, a 20 in suits above-ground pools up to 18 ft and inground pools of 12 × 24. Beyond that, go with a 24 in. The choice also depends on your pump's flow rate: we check before the quote.
Is my filter big enough for my pump?
The pump's flow rate must stay below the filter's maximum flow rate. A variable-speed pump at full speed can exceed the flow rate of a 20 in filter: we set it accordingly during installation.
When should the sand be changed?
When the water stays cloudy despite good chemistry, or backwashing becomes frequent. It can also be replaced with Nature Works glass.
How much does an installed filter cost?
The price depends on the filter, the media and the plumbing. We send you a complete installed price.
Is the filter compatible with a salt pool?
Yes. The polyethylene tank won't rust and suits salt pools as well as chlorine pools.
Do you install in my city?
Yes, if you're in Laval, Terrebonne, Blainville, Mirabel, Saint-Jérôme or elsewhere on the North Shore and in the Lower Laurentians. See all the cities we serve.
Get your price for the Helios 20 in
Filter, sand and installation. A team member will get back to you with a clear price.
