


Pool ionizerPurifitec by Nirvana
Copper and silver ions fight algae and bacteria. Your pool stays clear with much less chlorine, and the water is softer on the skin.
At a glance
The Nirvana Purifitec is an electronic ionizer for pools up to 150,000 litres. Its electrodes (70% copper, 20% silver, 10% zinc) release ions that fight algae and bacteria. It works with free chlorine of 0.5 to 1 ppm and a copper level of 0.2 to 0.4 ppm. The electrodes last up to 3 seasons.
- Copper, silver and zinc electrodes
- 6-level control box
- 2 in tee on the water return
- 3-year warranty (electrodes excluded)
Who the Purifitec is for
We'd rather steer you to the right equipment from the start. Here's when we recommend it, and when we suggest something else.
We recommend it if
- You want to use much less chlorine.
- You want water that's softer on the skin and eyes.
- Your pool holds less than 150,000 litres.
Another choice if
- You don't want to monitor the copper level: we can do it for you with the VIP maintenance plan.
- Your problem is mostly debris: take a look at the Betta SE skimmer.
How it works
Against algae
Copper ions keep algae from taking hold.
Against bacteria
Silver ions complement the action of chlorine.
Less chlorine
The unit works with 0.5 to 1 ppm of free chlorine.
Purifitec specifications
| Feature | Value |
|---|---|
| Capacity | 150,000 L (40,000 gal) |
| Electrodes | 70% copper, 20% silver, 10% zinc · up to 3 seasons |
| Setting | 6 positions (0 = off) |
| Power | CSA Class 2 adapter, 12 V DC output, on a GFCI outlet |
| Connection | 2 in tee on the water return |
| Flow rate | 12 to 80 gal/min |
| Water temperature | 2 à 30 °C |
| Water levels to maintain | Free chlorine 0.5–1 ppm · copper 0.2–0.4 ppm · pH 7.2–7.6 |
| Alkalinity · hardness | 80–120 ppm · 200–300 ppm |
manufacturing defects (electrodes excluded)
Installed and monitored by the same team
An ionizer needs to be set up properly from the start. We install it, adjust it and monitor the copper at our visits.
Installation
2 in tee on the water return and control box on a protected outlet.
Start-up
High setting for 8 to 10 days to reach the right copper level.
Setting
Once the water is stable, we lower it to the recommended setting.
Follow-up
We check the copper and the electrode wear at our visits.
Less chlorine, softer water, and the same clear water: that's what our clients notice first.
A word from the VP expertOur products for clearer water
| Model | Type | What it does | Electricity | |
|---|---|---|---|---|
| Purifitec | Copper-silver ionizer | Limits algae and bacteria, less chlorine | 12 V adapter | |
| Betta SE | Solar skimmer | Picks up surface debris | None (solar) | See → |
| Typhor robot | Cordless bottom robot | Cleans the pool floor | Rechargeable battery | See → |
| Nature Works | Glass filter media | Replaces the sand in the filter | None | See → |
Your questions about the Purifitec
Can I stop using chlorine completely?
No. The Purifitec reduces the chlorine needed: we aim for 0.5 to 1 ppm of free chlorine instead of the usual levels.
Can copper stain the pool?
A copper level that's too high can stain. That's why we keep copper between 0.2 and 0.4 ppm and pH between 7.2 and 7.6. The warranty does not cover stains caused by lack of maintenance.
When should the electrodes be replaced?
They last up to 3 seasons, depending on use and pool size. We check their wear at our visits.
Does it work with a salt pool?
Tell us about your setup: we check compatibility before recommending it.
Do you install in my city?
Yes, if you're in Laval, Terrebonne, Blainville, Mirabel, Saint-Jérôme or elsewhere on the North Shore and in the Lower Laurentians. See all the cities we serve.
Get your price for the Purifitec
Unit, installation and setup. A team member will get back to you with a clear price.
