Cloudy water usually comes from poor filtration or unbalanced chemistry (pH, alkalinity, chlorine). Check the filter and filtration time first, then have the water tested.
Possible causes
- Dirty filter or worn-out sand
- Filtration time too short
- pH or alkalinity out of range
- Chlorine too low after heavy use or a heat wave
What you can check yourself
- Look at the filter pressure gauge
- Backwash if you have a sand filter
- Run the filtration 24 hours a day for two days
Usual values for a residential pool
- Free chlorine1 to 3 ppm
- pH7.2 to 7.6
- Total alkalinity80 to 120 ppm
Test with a strip or a kit. If you are unsure, our technician tests the water on site.
How to prevent it
- Write down the filter pressure when it is clean: that is your baseline
- Clean the filter when the pressure rises about 8 to 10 psi above that baseline
- Test chlorine and pH once or twice a week
When to call us
If the water stays cloudy despite a clean filter and balanced chemistry.
Service call (travel and on-site diagnosis) : $179.99 Taxes extra.
Frequently asked questions
Cloudy water: what does it mean?
Cloudy water usually comes from poor filtration or unbalanced chemistry (pH, alkalinity, chlorine). Check the filter and filtration time first, then have the water tested.
What are the usual causes?
Dirty filter or worn-out sand; Filtration time too short; pH or alkalinity out of range; Chlorine too low after heavy use or a heat wave.
When should I call a technician?
If the water stays cloudy despite a clean filter and balanced chemistry.
How do I prevent it?
Write down the filter pressure when it is clean: that is your baseline; Clean the filter when the pressure rises about 8 to 10 psi above that baseline; Test chlorine and pH once or twice a week.
